Aka-raku Komachi Replica Red Raku Chawan

Shōraku
★★★★★ (1)
Regular price $288.00
Description

This Aka-raku chawan (matcha bowl) is a replica (写 - utsushi) of Komachi (小町): a 17th century bowl made by Dōnyū (道入), the 3rd Generation of the Raku family who is also known as Nonkō.

Like the original, it has a straight-walled half-cylindrical shape with vertical faceting or mentori (面取り)

Handbuilt from Shoraku's lightweight red clay blend and coated with a translucent glaze that allows the clay's colour to shine through, each chawan is then fired individually at around 800C.

Specifications

Made in Japan. Ships from the United States.

Width: 11.4 cm (4.5 in)
Height: 9 cm (3.5 in)

One of Japan's most recognisable styles, Raku-yaki (楽焼) or Raku ware was developed by famous tea master Sen-no-Rikyu in the late 16th century. Perhaps inspired by the recently created 引き出し黒 (hikidashi-guro) technique used to produce the Seto-guro style of black chawan, Rikyu collaborated with tile-maker Chojiro to produce a new style of ware for use in the tea ceremony. Hand-formed from porous clay rather than wheel-thrown, Raku chawan are then coated in a lead glaze, fired at low temperatures, and removed from the kiln while still glowing hot. Most Raku chawan exist in two styles: Aka-raku (red raku), and Kuro-raku (black raku).

Raku-yaki’s porosity and delicate nature means it requires special care. New Raku pieces should be soaked in warm water with rice for about 15, though care should be take not to leave Raku ware submereged for too long or it will begin to disintegrate. The rice water will enter the pores in the clay, strengthening the bowl, and slow any staining or cracking. However, glaze cracking and staining will still naturally occur over time, which is part of the nature of Raku ware

Aka-raku (赤楽) or red Raku is one style of Raku pottery.

One of Japan's most recognisable ceramic traditions, Raku-yaki (楽焼) or Raku ware was developed by famous tea master Sen-no-Rikyū in the late 16th century. Perhaps inspired by the recently developed 引き出し黒 (hikidashi-guro) technique used to produce the Seto-guro style of black chawan, Rikyū collaborated with tile-maker Chōjirō to produce a new style of ware for use in the tea ceremony.

Hand-formed from porous clay rather than wheel-thrown, raku chawan are then bisque-fired, glazed, and then fired individually or in small batches for a short amount of time at relatively low temperatures before finally being removed from the kiln while still glowing hot. The resulting bowls are very light and porous - imperfect in both shape and construction. Unlike porcelain or high-fired stoneware bowls which produce a high-pitched, bell-like ring when tapped, raku bowls are so low-fired that they only produce a dull thud.

The vast majority of raku chawan are made in the hantsutsu-gata shape, and are generally circular, with naturalistic imperfections, rather than intentional distortions.

Originally, raku chawan were always undecorated, as, in Rikyū’s eyes, decoration is an unnecessary artifice that distracts from the pure elegance of raku bowls’ simplicity. Today, however, it is not uncommon to find painted or otherwise decorated raku chawan.

When first made, these bowls may have been called Juraku-yaki (聚楽焼) as they were fired on the grounds of Hideyoshi’s Jurakudai palace (聚楽第). Hideyoshi gave both the wares the seal of ‘Raku’ (楽) meaning ‘enjoyment, and gave this name to Chōjirō himself as well. The descendants of Chōjirō continue to bear the family name Raku and still produce raku chawan to this day.

It is worth noting that ‘raku’ in the realm of western ceramics arts, refers to a derivative, but separate practice.

The organic shapes, rough textures, and natural imperfections of this style made Raku pottery almost synonymous with wabicha and the later term "wabi-sabi".

Pictured here is Tarobo, one of the original Aka-raku chawan.

aka-raku

Made by Sasaki Shōraku (佐々木昭楽) of Shōraku Kiln (昭楽窯). This is the same Sasaki Shōraku that produces work signed (松楽), which is also read as Shōraku. Works stamped (松楽 - Shōraku) are more entry grade, whereas works stamped (昭楽 - Shōraku) are of a higher quality. The current kiln is located in Kameoka, Kyōto and was built in 1944. That same year, Sasaki Shōraku was born, and after studying under his father, he became Shouraku III: the third generation to carry the title. His work emulates the early raku wares of Chojiro and Hon'ami Koetsu. Today, both the 3rd and 4th generation potters of the kiln are famous for their raku bowls.

David and Sasaki Shōraku in a pottery studio with clay pots and a kiln.

★★★★★
★★★★★
★★★★★
★★★★★